Brand Name: Jazrider Japan

Battery Charger Features:
- It is very smart charger which can auto-switching output. - It can charge any 2.4-7.2V Ni-MH/Ni-Cd battery pack which capacity is more than 1000mAh.
- The charger will cut off automatically if battery is fully charged.
- MCU control the whole charge process and guarantee the battery pack get fully charge,avoid the battery pack over-charge.
- Led indicate the charge status,red and green led flash for 2 times after plug-in ,then both off,red led on in charging, green led on after fully charge.end charge by negative delta V or peak voltage detection,red led flash in error status.

Battery Charger Dimension: 115.0(L) X 45.0(W) X 34.0(H) mm

Battery Charger Specification:
- Input:100-240Vac
- Output:2.4-7.2Vdc according to the battery pack
- Charging current:500~1800mA

Protection:
- Zero voltage battery protection.
- Short circuit protection.
- Battery pack reverse connect protection.

Warning:
- Charge 2-12 serials 1.2V Ni-MH/Ni-Cd battery pack which capacity is more than 1000mAh only.
- Don't remove the cover avoid electric shock.
- Dry location use only.
- Indoor use only.